1. Introduction Dye-sensitized solar cells (DSSCs) using organic liquid electrolytes have received significant attention because of their low production cost, simple structure and high power conversion efficiency [1-5]. Recently, the power conversion efficiencies of DSSCs using Ruthenium complex dyes, liquid electrolytes, and Pt counter electrode have reached 10.4 % (100 mW/cm2, AM 1.5) by Gr채tzel group [6]. However, the important drawback of DSSCs using liquid electrolyte is the less long-term stability due to the volatility of the electrolyte contained organic solvent. In the viewpoint for commercialize, durability is a crucial component. Then, gel electrolytes are being investigated to substitute the liquid electrolytes [7-10]. One way to make a gel electrolyte is to add organic or inorganic (or both) materials. In the past decades, many studies have been carried out on this kind of gel electrolyte, and great progress has been achieved [11-12]. The advantages of them include; limited internal shorting, leakage of electrolytes and non-combustible reaction products at the electrode surface existing in the gel polymer electrolytes [13-14]. However, because of their complicated preparing technology and poor mechanical strength, they cannot be used in commercial production [15-16]. To overcome this problem, the polymer membrane is soaked in an electrolyte solution that has been examined [17-19]......